easypeel spot- gold & silver (unprintable)

EASYPEEL SPOT- GOLD&SILVER	SPECIFICATION
Printing on	B sheet
Printing mode	Ultraheavy2 setting for OKI, Bonded label setting for others
Compatible printer	OKI 4C, HP, EPSON, CANON or even mono printers (no need of White)  (OKI 5C machine is not compatible, Turn off WHITE for CMYK machine)
Printing color	CMYK mixed color (to have max. glue effect), no mirroring  Do not use white toner. CMYK Mix of eaach 100% gives better performance. HEAT PRESS 5sec for B sheet to remove humidity before printing
Pretreatment	HEAT PRESS 5 sec for fabric to remove humidity
​Glue transfer (A + B)	165℃ 90 sec, Strong Pressure (max. 110 sec depending on result)  Put glue paper close to the heating plate of heat press ​
A-B Separation	​Separate slowly from corner to corner during paper is HOT (within 5 sec after transfer. when getting cold, failure rate increases.) Rub 2~3 times fast on the paper with soft fabric  before separation to have better result.
Image transfer  (A->Tshirts)	165℃ 20~30 sec, Any pressure Put A paper close to the heating plate of heat press
*T-shirts Separation	Be sure to fully cool down the fabric. (leave the fabric longer than 30 min. at room temperature or put it into refrigerator for faster cooling) ​
Stabilization	Heat press 10sec on the fabric  Better to use protection paper on top of fabric

A-Tshirts separation is the most difficult process.
Be sure to fully cool down the fabric. Forced cooling by ice
or refrigerator can be used.
Be sure to use MIXED BLACK (do not use K toner only)
and add more white for better result.
Too high pressure will fade down the glittering of metalic film.

easypeel spot - silver reflective (unprintaBLE) AND CLEAR REFLECTIVE (PRINTABLE)​

EASYPEEL SPOT-SILVER/CLEAR REFLECTIVE	SPECIFICATION
Printing on	B Sheet
Printing mode	Ultraheavy 2 setting for OKI, Bonded Label setting for others
Compatible printer	OKI4C, OKI5C, HP, EPSON, CANON or even mono printers (no need of White)
Printing color	FOR SILVER REFLECTIVE: CMYK mixed or CMYW mixed or CMYKW mixed or K only FOR CLEAR REFLECTIVE: CMYK or CMYKW (white on bottom)* white toner is required  Color image can be printed for Clear Reflective film. No mirroring
Pretreatment	HEAT PRESS 5 sec for fabric to remove humidity
Glue transfer (A+B)	165℃ 90 sec, Strong pressure (max. 110 sec depending on result) Put glue paper close to the heating plate of heat press
A-B Separation	Separate slowly from corner to corner during paper is HOT (within 5 sec after transfer. When getting cold, failure rate increases.) Rub 2~3 times fast on the paper with soft fabric before separation to have better result
Image transfer (A-Tshirts )	80~165℃, 20~60 sec, Any pressure Put A paper close to the heating plate of heat press Heat-sensitive fabrics like nylon, poly, Spandex or Gore-tex can be compatible
A-Tshirts separation	Be sure to fully cool down the fabric. (leave the fabric longer than 30 min. at room temperature or put it into refrigerator for faster cooling)
Stabilization	Heat press 10 sec on the fabric Better to use protection paper on top of fabric

• This film can easily replace expensive 3M™ Scotchlite™ Reflective Material'.
• Laws force attaching reflective film partly on every outdoor clothing.
• Very easy to operate with any kind of printers, even mono printers.
• Mild condition of operation can be done on heat-sensitive fabrics.
• No need of white when using SILVER REFLECTIVE FILM.
• Color printed reflective film can be produced by CLEAR REFLECTIVE FILM.
• Brightness meets the regulation for safety.​