easypeel dark(printable)

EASYPEEL DARK	SPECIFICATION
Printing on	A sheet
Printing mode	Ultraheavy2 setting for OKI
Compatible printer	OKI 4C machine, OKI 5C machine
Printing color *White toner required	White on top, mirroring the image  CYMW(4C), KCMYW(5C), White =  more than 30%
Pretreatment	Heat press 5 sec for fabric and B sheet to remove humidity
Glue transfer (A +B)	165℃ 90 sec, Strong pressure (max. 110 sec depending on result) Put glue paper close to the heating plate of heat press
*A-B Separation	Separate slowly from corner to corner during paper is HOT  (within 5 sec after transfer. when getting cold, failure rate increases .) Run 2~4 times fast on the paper with soft fabric before separation to have better result .
Image transfer (A->  Tshirts)	165℃ 20~ 30 sec, Any pressure Put A paper close to the heating plate of heat press
T-shirts Separation	Bes shure to fully cool down the fabric (wait more than 5 mins)
Stabilization	Heat press 10 sec on the fabric Better to use protection paper on top of fabric

A-B separation process is the most difficult.
Separate film cautiously but promptly during the film is hot.
Rubbing in advance will help. If film cools down easily, try to increase the temperature and time.
When using pneumatic press, do not use too high pressure.